High_Holding_Power_Anchor.jpg

High holding power anchors

Fendercare Marine's high holding power anchors have been specifically designed to ensure the safe and effective mooring of your vessels.

Our high holding power anchors are designed with large fluke areas to increase seabed penetration and therefore holding performance capabilities. Our anchors are designed and manufactured using advanced materials, providing significant strength to weight ratios.

We also design and produce bespoke solutions for specific applications. Whatever your requirements, we will always endeavour to provide the most economical and efficient solution, on time and on budget.

AC-14 type high holding power stockless anchor (A3-10012)

The AC-14 is one of the most versatile of the high holding power anchors and has a 25% weight reduction in comparison to conventional high holding power anchors, with an optimum weight to performance ratio.

A cast steel high holding power ship’s anchor originally designed for the Royal Navy in the late 1940s, the AC-14 is certified by all major class societies and is in extensive use worldwide, in sizes in excess of 20,000 kg.

AC-14 typical dimensions:

Weight (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm)
56 612 555 170 489 376 113 298
100 745 675 200 593 458 135 364
135 745 675 205 593 458 135 364
180 909 822 252 724 558 166 442
225 1010 915 277 808 623 185 495
250 1010 915 280 808 623 185 495
270 1040 940 288 828 638 190 508
300 1075 975 298 860 660 200 525
315 1075 975 300 860 660 200 525
340 1120 1015 310 895 690 205 548
360 1120 1015 313 895 690 205 548
428 1213 1098 336 967 745 222 590
495 1255 1135 348 1000 770 230 610
590 1350 1220 375 1075 829 246 658
675 1412 1278 390 1125 868 257 690
765 1470 1335 408 1175 906 269 718
910 1560 1410 430 1241 957 284 760
970 1592 1445 440 1270 978 292 775
1080 1650 1495 455 1316 1014 302 805
1200 1710 1545 470 1365 1050 315 835
1305 1760 1595 485 1405 1082 323 858
1361 1782 1615 495 1422 1096 326 870
1440 1818 1645 505 1450 1118 332 885
1575 1875 1695 518 1495 1152 343 915
1710 1925 1745 532 1536 1184 352 940
1845 1975 1785 546 1577 1215 362 965
1980 2020 1830 560 1612 1242 370 985
2100 2065 1865 570 1645 1268 377 1005
2295 2130 1920 588 1695 1310 385 1035
2475 2175 1970 602 1735 1340 395 1062
2655 2225 2018 615 1776 1368 408 1085
2794 2265 2055 625 1808 1393 415 1105
3040 2320 2100 640 1850 1424 426 1130
3550 2455 2225 680 1958 1508 450 1198
3670 2480 2248 688 1980 1525 455 1210
3940 2540 2300 705 2027 2562 465 1240
4500 2655 2405 735 2117 1632 485 1295
4840 2720 2465 755 2170 1670 500 1330
5175 2785 2520 770 2220 1710 510 1358
5610 2858 2590 790 2281 1758 523 1396
6000 2922 2646 810 2331 1796 535 1426
6450 2995 2712 830 2388 1840 548 1462
6900 3062 2775 848 2444 1884 560 1496
7350 3126 2832 866 2495 1923 572 1526
7800 3190 2890 884 2546 1962 584 1558
8300 3256 2950 902 2598 2002 596 1590
8700 3308 2996 916 2639 2034 605 1614
9300 3382 3064 936 2699 2080 619 1652
9675 3425 3104 948 2735 2108 627 1674
9900 3452 3128 956 2756 2124  632 1686
10,500 3523 3192 976 2811 2166 645 1720
11,100 3589 3252 994 2864 2207 657 1752
11,700 3650 3308 1010 2913 2245 668 1782
12,300 3712 3364 1028 2963 2283 680 1812
12,900 3772 3418 1044 3010 2320 690 1842
13,500 3830 3470 1060 3055 2355 700 1870
14,100 3885 3520 1076 3099 2389 710 1896
14,700 3940 3570 1090 3144 2423 721 1924
15,400 4002 3626 1108 3193 2461 732 1954
16,100 4062 3680 1125 3242 2498 744 1982
16,900 4128 3740 1144 3293 2538 755 2016
17,800 4200 3806 1162 3352 2583 769 2050
18,800 4277 3875 1185 3413 2630 783 2088
20,000 4366 3956 1210 3485 2685 800 2132

Pool N type high holding power stockless anchor (A3-10015)

The Pool N high holding power anchor has a very stable and reliable anchoring character due to its large wide fluke area and is typically used for ship, rather than barge, applications, including fully-pocketed installations.

Available in a wide range of sizes from 60kg to over 15,000kg, the smaller sizes can be supplied to order with a galvanised finish. This anchor is also approved by all major class societies.

Pool TW type high holding power stockless anchor (A3-10014)

The Pool TW high holding power anchors are designed with large flat flukes and have the best combination of holding power and fluke surface for high performance. All the main edges of the Pool TW anchor are honed to enable the Pool TW anchor to dig into the seabed more easily for minimum drag, but are supplied with crownplates to ensure the anchor doesn't dig in too deep. The Pool TW high holding anchor also has a low breakout force requirement.

Available in a wide range of holding capacities and sizes, from 60kg to over 15,000kg, the smaller sizes can also be supplied to order with a galvanised finish. The Pool TW anchor is approved by all major class societies.

The Pool TW high holding power anchor is typically for ship applications, including fully pocketed installations, rather than barges and smaller vessels.

BACK TO TOP